Sharp LASER PRINTER Operation Manual page 131

Automatic two-sided copying from the automatic document
feeder
A duplex module must be installed for automatic 1-sided to 2-sided or 2-sided to 2-sided copying. A duplex module is
not needed for 2-sided to 1-sided copying.
Original
1
Place the originals in the document feeder tray.
(page 7)
2
Touch the [2-SIDED COPY] key.
2-SIDED COPY
OUTPUT
3
Select the desired duplex copy mode.
The image to be copied onto the second side of 2-sided
copies can be inverted so that the resultant 2-sided copies
are in the correct orientation for binding at the top. For top
binding, touch the [BINDING CHANGE] key on the 2-sided
copy selection screen.
Copy
The illustration to the left
shows the screen
BIN
CHA
displayed when a duplex
module is installed.
1. Automatic two-sided copying from one-sided
originals
2. Automatic two-sided copying from two-sided
originals
3. Automatic one-sided copying from two-sided
originals
4
Touch the [OK] key.
OK
BINDING
CHANGE
Follow step 6 on page 9 to step 9 on page 10.
NORMAL COPYING
11