Setting For F-Code Polling Memory Boxes (Number Of Transmissions) - Sharp LASER PRINTER Operation Manual

8
Use the numeric keys to enter a passcode (max.
20 digits).
F-CODE MEMORY BOX / POLLING MEMORY
No.001
SUB ADDRESS / PASS CODE
ENTER THE SUB ADDRESS / PASS CODE VIA THE 10-KEY PAD, THEN PRESS [OK].
214341434/351212
In addition to numbers, the characters " " and "#" can
be used in a passcode.
If you make a mistake, press the C key to clear the
mistake.
SETTING FOR F-CODE POLLING MEMORY BOXES (NUMBER
OF TRANSMISSIONS)
You can select whether to have document data that was scanned into an F-code polling memory box automatically
cleared after one transmission, or to leave the document data in the box and allow an unlimited number of transmissions
when polled. (The initial setting is "ONCE". Change the setting as needed.)
1
Touch the POLLING TIMES key.
FAX INFORMATION
BOX NAME
SUB ADDRESS
214341434/351212
POLLING TIMES ONCE
PROGRAMMING, EDITING, AND DELETING F-CODE MEMORY BOXES
NEXT EXIT
CANCEL OK
PASS CODE
9
Touch the OK key.
CANCEL OK
10-KEY PAD, THEN PRESS [OK].
PASS CODE
Continue programming the settings that are
particular to each type of memory box. Refer to the
following pages:
F-code polling memory (this page)
F-code confidential transmission (next page)
F-code relay broadcast transmission (page
6-13)
2
Touch the key for the desired number of
transmissions.
If you wish to leave the document data in the box, touch
the UNLIMITED key to highlight it.
F-CODE MEMORY BOX / POLLING MEMORY
No.001
POLLONG TIMES
ONCE
UNLIMITED
3
Touch the OK key.
You will return to the programming screen for the F-code
polling memory box. The selected number of
transmissions appears.
You will return to the
memory box programming
screen. The entered sub-
address and passcode are
displayed. REGISTRATION
IS COMPLETED appears to
the right of the box number.
NEXT EXIT
OK
6-11
6