Storing, Editing, And Deleting Auto Dial Keys And Programs; Programming - Sharp LASER PRINTER Operation Manual

PROGRAMMING

There are two methods for storing and editing auto dial numbers (one-touch keys and group keys), user indexes, and
memory boxes: using the touch panel of the machine, and using a Web browser (Netscape Navigator, Internet Explorer,
etc.) on your computer to access the Web page in the machine. This chapter only explains the procedures for storing,
editing, and clearing using the touch panel of the machine. For the procedure for accessing the Web page and items
that can be stored, edited and cleared in the Web page, refer to pages 2-6 through 2-8 of "Operation manual (for
printer operation and general information)".
STORING, EDITING, AND DELETING AUTO
DIAL KEYS AND PROGRAMS
This section explains the procedures for storing, editing, and deleting auto-dial keys (one-touch keys and group keys)
and programs, which simplify the transmission procedure. (The procedure for using one-touch keys and group keys is
explained on page 2-5 and the procedure for using programs is explained on page 3-11.)
A combined total of 500 one-touch keys and group keys can be stored, and eight programs can be stored. If you
attempt to store more than this, a warning message will appear. In this case, delete any auto-dial keys or programs
that are no longer needed (refer to pages 6-5, 6-7 and 6-8), and then store the new auto-dial key or program.
NOTE
To cancel a storing, editing, or deleting operation, press the CA key. Pressing the CA key takes you out of CUSTOM SETTINGS mode.
To store, edit, or delete an auto-dial key (one-touch key or group key) or program, first follow steps 1 through 4 below.
1
Press the CUSTOM SETTINGS key.
2
Touch the ADDRESS CONTROL key.
ADDRESS
REC
CONTROL
KEY OPERATOR PRO
6-2
3
Touch the DIRECT ADDRESS / PROGRAM key.
DIRECT ADDRESS / PROGRAM
CUSTOM INDEX
4
Touch the desired key and perform the
programming operation.
Refer to the pages indicated below for the
operation you wish to perform.
CUSTOM SETTINGS
DIRECT ADDRESS / PROGRAM
STORE
INDIVIDUAL GROUP
INDIVIDUAL key PROGRAM key
Store a one-touch Store a program
dial key (following key (page 6-8)
page)
GROUP key
Store a group key
(page 6-6)
The DIRECT ADDRESS /
PROGRAM menu appears.
OK
PROGRAM AMEND/DELETE
AMEND/DELETE key
• One-touch key
(page 6-5)
• Group key (page 6-7)
• Program (page 6-8)