Selecting The Exposure And Exposure Mode; Selecting The Exposure And Exposure; Mode - Sharp MX-2300G Quick Start Manual

SELECTING THE EXPOSURE AND
EXPOSURE MODE
The exposure can be set to match the darkness of the colours in the original and the exposure mode can be set to
match the original type.
This section explains how to darken a light original and set the exposure mode to "Text".
The side to be scanned must be face up!
Scan
Auto
Mode Switch
Exposure
Image
(2)
Settings
200X200dpi
(1) Resolution
Send Settings
Auto A4
Special Modes
Original
When Fax/I-Fax address is included,
exposure setting shared among Fax/
I-Fax/ Scanner mode is selected.
Scan
Moiré Reduction
Exposure
Auto
(4)
Manual
5
1 3
(5)
60
Mono2/Auto Address Book
Colour Mode
Address Entry
TIFF/JPEG
File Format
Special Modes
File
Quick File
OK
(3)
OK
(7)
Text/
Text/Photo
Prtd.Photo
Photo
Text
(6)
Printed
Map
Photo
or
1
Place the original.
When using the document glass, place the original
with the side to be scanned face down.
2
Select exposure settings in the touch
panel.
(1) Touch the [Image Settings] key.
(2) Touch the [Exposure] key.
(3) Read the displayed message and touch
the [OK] key.
(4) Touch the [Manual] key.
(5) Darken light colours with the
Five levels are available for the contrast.
Darken light originals with the
lighten dark originals with the
(6) Touch the [Text] key.
(7) Touch the [OK] key.
3
Select the destination and then press the
[COLOUR START] key or the [BLACK &
WHITE START] key.
key.
key, and
key.
Cancel scanning