Table of Contents
Advertisement
Selecting the Exposure
Auto
Select to have the exposure level automatically adjusted.
1-2
Select for originals with dark characters.
3
Select for originals with normal characters.
4-5
Select for originals with faintly written characters.
You cannot change the exposure while the original is being read into memory. If scanning from the
original table, you can change the exposure when you place the next page of the original.
Note
Returning the exposure setting to auto mode...
After you have manually selected an exposure setting, to return to auto mode press the
5 indicator is lit, and then press the
indicator is lit, then press the
SELECTING FAX RESOLUTION • EXPOSURE CONTROL
Selecting the Exposure
In fax mode, set the originals, and press the light and
1
dark keys (
Initially the exposure indicator is not lit and exposure control is
automatic.
To darken the exposure, press the
To lighten the exposure, press the
If you select an intermediate exposure level (for example 2 or 4), that
indicator and an adjacent indicator light up.
key once more. Similarly, you can press the
key once more.
and
).
key.
key.
key until the
key until the 1
1-15
Advertisement
Table of Contents
