Before You Begin; Connecting The Handset - Cisco SPA 525G User Manual

Ip phone for 8x8 virtual office

Hide thumbs Also See for SPA 525G:

Table of Contents

Installing Your Phone

Before You Begin

NOTE

CAUTION

STEP 1

STEP 2

Cisco Small Business IP Phone SPA 525G User Guide (SIP)

Before you install and connect your phone, verify with your phone administrator (if

applicable) that the network is ready for the phone, read the safety notices, and make sure you

have all the phone parts and documentation available.

The RJ-11 port marked "AUX" is reserved for connection with the Cisco SPA 500S Attendant

Console that works with the Cisco SPA 525G. It is not for use as a telephone line port.

Do not plug a telephone line cord into the port marked "AUX."

Find the longer end of the coiled phone cord. Insert it into the back of the phone base in the

slot marked with a phone symbol. This port is labeled #5 on the

Connections

graphic.

Insert the short end of the handset cord into the jack at the bottom of the handset (not shown).

Cisco SPA 525G IP Phone

Table of Contents

Show Quick Links

Table of Contents