Connecting The Handset - Cisco SPA525G User Manual

Installing Your Phone

Connecting the Handset

Connecting the Handset

STEP 1
STEP 2
SPA525G (SPCP) User Guide
Find the longer end of the coiled phone cord. Insert it into the back of the phone
base in the slot marked with a phone symbol. This port is labeled #6 on the
SPA525G IP Phone Connections
Insert the short end of the handset cord into the jack at the bottom of the handset
(not shown).
Figure 2 Cisco SPA525G IP Phone Connections
graphic.
2
Cisco
21