5.2.1 Status: Port Details
Click a number in the Port column in the Status screen to display individual port statistics. Use this
screen to check status and detailed performance data about an individual port on the Switch.
Figure 19 Status: Port Details
The following table describes the labels in this screen.
Table 7 Status > Port Details
LABEL
Port Info
Port NO.
Name
Link
State
LACP
TxPkts
GS3700/XGS3700 Series User's Guide
DESCRIPTION
This field displays the port number you are viewing.
This field displays the name of the port.
This field displays the speed (such as 100M for 100Mbps, 1000M for 1000 Mbps, or 10G
for 10 Gbps) and the duplex (F for full duplex).
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port (see
Section 11.1.3 on page 113
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays
STOP.
This field shows if LACP is enabled on this port or not.
This field shows the number of transmitted frames on this port
Chapter 5 System Status and Port Statistics
for more information).
53