Event Edit - Korg iS35 User Manual

Page 4: Event edit
The Event Edit allows you to modify single events, for
example the notes and control change messages
(pedal, volume, pan). This can also allows you to make
the recording step-by-step.
Track
Track
[01...16, TEMPO]
The track you wish to edit.
Edit procedure
1. Select the track to be edited. Press REC/WRITE/
LYRICS and then START/STOP.
Measure number / Index number
2. Select the "Measure number/Index number"
parameter and go to the event you wish to modify.
Make the necessary modifications.
3. To insert an event, go to the position of the event to
be inserted and press RESET/INS. Select the type
of event with the TEMPO/VALUE buttons (or the
DIAL).
4. To erase an event, go to the event to be erased and
press TAP TEMPO/DEL.
5. At the end press START/STOP to exit the event
edit page.
Step recording procedure
1. Go to "Page 7: Edit", select «INS» and press
ENTER/YES.
Track First measure
2. Select the number of measures and the time signa-
ture (4/4, 3/4...) of the song measures. Press
ENTER/YES to insert the measures.
3. Go back to "Page 4: Event edit".
4. Select the track in which the events must be
inserted and press
START/STOP to enter the edit mode.
Measure number/index number
Event
5. Select the position in which you wish to insert the
event. The event cannot be inserted in the first
measure bar ("BAR 1"). Use the TEMPO/VALUE
buttons (or the DIAL) to go to the next position.
6. Press RESET/INS to insert the event. Once you
have pressed RESET/INS, select the type of event
with the TEMPO/VALUE buttons (or the DIAL).
Inserted parameter. Use TEMPO/VALUE (or the
dial) to modify it.
7. To erase an event, go to the event to be erased and
press TAP TEMPO/DEL.
Reference • Song Edit mode
Time signature
Number of measures
REC/WRITE/LYRICS
Time signature
129
+