Korg iS35 User Manual page 205

F Feedback –99%...+99%
H High damp 0%...99%
D
L Equalizer low –12 dB...+12
dB
H Equalizer high –12 dB...+12
dB
→ Dry:Effect balance
DRY,
B1...B99, FX
15: Dual Delay
15: Dual Delay applies an independent mono delay to
the left and right input signals.
Left
Right
Delay time L 0...500 ms
L Feedback L –99%...+99%
Set the amount of feedback; i.e.,
the amount of the delayed signal
that will be returned to the input
of the delay. Higher settings will
produce a greater number of
delay repeats, and it will take
longer for the echoes to die
away. Negative settings will
invert the phase of the feedback,
causing the echoes to have a
harder tone quality, and less of a
hollow feeling.
Set the degree to which the high
frequencies will be attenuated.
Higher settings will cause the
high frequencies to decay more
rapidly.
Set the amount of boost or cut
that the shelving type equalizer
will apply to the region below 1
kHz.
Set the amount of boost or cut
that the shelving type equalizer
will apply to the region above 1
kHz.
Set the balance between the
direct sound (DRY) and the
sound processed by the effect
(FX). With a setting of DRY, the
effect will be turned off. With a
setting of FX, only the delayed
sound will be heard. Other set-
tings set the proportion of the
direct sound and effect sound.
P. 194.
Mix
Feedback
Delay L
Delay R
Feedback
Mix
Set the delay length of the left
channel.
Set the amount of feedback for
the left channel; i.e., the amount
of the delayed signal that will be
returned to the input of the
delay. Higher settings will pro-
duce a greater number of delay
repeats, and it will take longer
for the echoes to die away.
Negative settings will invert the
phase of the feedback, causing
the echoes to have a harder
tone quality, and less of a hollow
feeling.
H High damp L 0%...99%
D
→ Dry:Effect
DRY,
balance B1...B99, FX
Delay time R 0...500 ms
R Feedback R –99%...+99%
H High damp R 0%...99%
D
→ Dry:Effect
DRY,
balance B1...B99, FX
16...18: Multitap Delay
Multitap delay passes the input signals through two
independent delays. The multi-echo effect that this
produces will create a pair of echoes for each note that
is played.
16: Multitap Dly1 is the standard multitap delay.
17: Multitap Dly2 cross-pans the signals, causing the
echoed left and right channel signals to change places.
18: Multitap Dly3 exchanges the feedback between
channels, causing each pair of echoes to switch
between left and right.
Reference • Effects
Set the degree to which the high
frequencies of the left channel
will be attenuated. Higher set-
tings will cause the high fre-
quencies to decay more rapidly.
Set the balance between the
direct sound (DRY) and the
sound processed by the effect
(FX) for the left channel. With a
setting of DRY, the effect will be
turned off. With a setting of FX,
only the echo will be heard.
Other settings set the proportion
of the direct sound and effect
sound.
P. 194.
Set the delay length of the right
channel.
Set the amount of feedback for
the right channel. The contents
are the same as for the Feed-
back L parameter.
Set the degree to which the high
frequencies of the right channel
will be attenuated. Higher set-
tings will cause the high fre-
quencies to decay more rapidly.
Set the balance between the
direct sound (DRY) and the
sound processed by the effect
(FX) for the right channel. The
contents are the same as for the
DRY:FX parameter explained
above.
P. 194.
197