Load One - Korg iS35 User Manual

Reference • Disk/Global mode
3. Choose the desired file with the TEMPO/VALUE
buttons (or the DIAL).
4. Press ENTER/YES to load the file (or press EXIT/
NO to cancel the procedure). If all the data
requested by the ALL file is not found on the disk,
for example because of a partial saving performed
earlier, an error message ("Missing some files") will
appear after loading.
ARR (ARRANGEMENT)
The ARR files contain up to 64 arrangements to be
located in the USER bank. If there are also files with
styles of the same name as the ARR file (but with the
filename extension STY), the USER styles up to a max-
imum of 16 (USER 11-28 styles) will also be loaded
along with the arrangements.
1. Insert the disk.
2. Select ARR and press ENTER/YES. The display
will show the name of the ARR files contained in
the disk. The file extension will not appear.
3. Select the desired file with the TEMPO/VALUE
buttons (or the DIAL).
4. Press ENTER/YES to load the file (or, press EXIT/
NO to cancel the procedure). If all the data
requested by the ARR file is not found on the disk,
an error message ("Missing styles") will appear
after loading.
PRG (PROGRAM)
The PRG files contain 64 programs of the F(USER)
bank and the two Drum programs of USER (Dr 27 e Dr
28) type.
1. Insert the disk.
2. Choose PRG and press ENTER/YES. The PRG
filenames contained on disk will appear in the dis-
play. The filename extension will not appear.
3. Choose the desired file with the TEMPO/VALUE
buttons (or the DIAL).
4. Press ENTER/YES to load the file (or, press EXIT/
NO to cancel the procedure).
142
BSQ (BACKING SEQUENCE)
The BSQ files contain up to 10 backing sequences.
1. Insert the disk.
2. Choose BSQ and press ENTER/YES. The BSQ
filenames contained on disk will appear in the dis-
play. The filename extension will not appear.
3. Choose the desired file with the TEMPO/VALUE
buttons (or the DIAL).
4. Press ENTER/YES to load the file (or, press EXIT/
NO to cancel the procedure).

1-2. Load one

The Load One function allows you to load a single ele-
ment from a file: an arrangement (ARR), a program
(PRG), a backing sequence (BSQ) or a style (STY).
1. Press DISK/GLOBAL.
2. Select LOAD and press ENTER/YES.
Load
(ALL) (ONE) (GLOBAL)
3. Select ONE and press ENTER/YES.
Arrangement Program
4. Select one of the options and press ENTER/YES to
view the disk directory.
(KBSET)
Backing Style
Sequence