The Backing Sequence Demo - Korg iS35 User Manual

Getting Started • Tutorial
To exit the Demo mode
Press EXIT/NO or one of the buttons of the
MODE section.
By pressing EXIT/NO you go back to the Arrange-
ment Play mode. by pressing a button of the MODE
section you go to the selected mode.

The Backing Sequence demo

The Accessory Disk supplied with the instrument con-
tains the demonstration backing sequences. Reading
them on disk will help us understand how the backing
sequences work.
Insert the Accessory Disk into the disk drive.
1
2 Press DISK/GLOBAL to enter the Disk/Global
mode.
The DISK/GLOBAL led will light up. The DISK/
GLOBAL indicator will appear on the display.
While the cursor is on (LOAD), press ENTER/YES
3
to enter the "Load" subpage.
Load
(ALL) (ONE) (GLOBAL)
Move to cursor on (ONE), and press ENTER/YES
4
to enter the "Load One" subpage.
28
(KBSET)
Move the cursor on (BSQ), and press ENTER/
5
YES view the files contained in the disk.
Backing sequence in
Filename
The display shows the name of the file which con-
tains the backing sequence to be loaded, the back-
ing sequence number and the location number in
the memory where to load it.
Use the TEMPO/VALUE buttons (or the DIAL) to
6
select the file you wish to load.
We will load the "Factory" file in this example.
Select the backing sequence you wish to load
7
and the memory location where to load it.
In the figure the backing sequence 00 will be loaded
in location 00. Each file can contain up to ten back-
ing sequences and there are ten backing sequence
locations in the memory, numbered from 00 to 09.
To select a different backing sequence or load it in a
different location, move the cursor to the "BS00"
parameters and select different numbers and loca-
tions.
We do not need to make any change in the exam-
ple, since we want to load the backing sequence 00
in location 00.
8 Press ENTER/YES to load the selected backing
sequence.
When "Completed" appears on the display,
9
press B.SEQ to enter the Backing Sequence
mode.
The B.SEQ button led will light up. The BACKING
SEQUENCE indicator will appear on the display.
Use the CURSOR buttons to move the cursor to
0
the back sequence name. Use the TEMPO/
VALUE buttons (or the DIAL) to select the backing
sequence you wish to listen to.
We do not need to make any change in the exam-
ple, since the backing sequence 00 is already
selected when switching to the Backing Sequence
mode.
A Press START/STOP to start the playback.
Memory loca-
the file tion