Load Global; Load Keyboard Set; Save - Korg iS35 User Manual

Reference • Disk/Global mode
STY (STYLE USER)
This option allows you to load a style from a style file
(.STY). There are 16 USER style locations available
(U11-U28).
Source file Style to be
loaded
1. With the TEMPO/VALUE buttons (or the DIAL)
choose the file from which you wish to load the
style.
2. With the CURSOR buttons, move the cursor to the
second field. Use the TEMPO/VALUE buttons (or
the DIAL) to choose the style you wish to load.
3. With the CURSOR buttons, move the cursor to the
third field. Use the TEMPO/VALUE buttons (or the
DIAL) to choose the location where you wish to
load the style.
4. Press ENTER/YES to load the style. (Or press
EXIT/NO to cancel the operation).

1-3. Load global

The Load Global function allows you to load a Global
file (.GBL), containing most of the settings of this oper-
ative mode. By loading the Global data, the scale,
pedal settings, control settings and MIDI channel set-
tings may be automatically modified. The Global con-
tains also the fourteen USER scales.
Source file
1. Using the TEMPO/VALUE buttons (or the DIAL)
choose the Global file you wish to load.
2. Press ENTER/YES to load the file. (Or press EXIT/
NO to cancel the operation).
144

1-4. Load keyboard set

The Load All Keyboard Set function allows to load the
Keyboard Sets. Any Keyboard Sets already in memory
will be deleted.
If you are loading data from a Korg iS40, iS50 or iS50B
disk, an error message ("Missing HMB file") will
appear at the end of the loading procedure, because
the Vocal/Guitar setup file is missing in these instru-
ments. The loaded data will work properly, although
the setup data of the Vocal/Guitar section is missing.
Target location
1. Select the Keyboard Set file you wish to load, using
2. Press ENTER/YES to load the file. (Or press EXIT/

2. Save

The Save function allows you to save data on disk. It is
not possible to save single elements in a file; All the
data of a certain type previously existing in memory,
will always be saved in a file
1. Choose a file type and press ENTER/YES to give it
2. Use the CURSOR buttons to move the cursor to the
3. Press ENTER/YES to save the file on disk. If a file
Source file
the TEMPO/VALUE.
NO to cancel the operation).
All data
Save (ALL)(KBSET)
(ARR)(PRG)(BSQ)(GLB)
All arrange- All programs
ments
a name.
character to be changed. Choose a character with
the TEMPO/VALUE buttons (or the DIAL). Press
INS to insert a character at the cursor location, DEL
to delete the character at the cursor location. The
name can be up to 8 characters long (capital letters
and numbers).
with the same name already exists on disk, a mes-
All Keyboard Sets
All backing The Global
sequences