Recording - Korg iS35 User Manual

Reference • Song Edit mode
Page 2: Recording
To enter the recording mode, go to Page 2 in the Song
Edit mode, then press REC/WRITE/LYRICS. To go
back to playback press REC/WRITE/LYRICS or
EXIT/NO.
Track Record mode
Tempo mode
Starting measure
The typical recording procedure is:
1. Go to Page 2 in the Song Edit mode.
2. Select the track you wish to record using the but-
tons of the VOLUME/PROGRAM section. Use the
TRACK SELECT button to switch from tracks 1-8 to
9-16.
3. While in Page 2, press REC/WRITE/LYRICS to
enter the recording mode.
4. Program the various parameters (tempo, time sig-
nature, etc.).
5. Press START/STOP to start recording.
6. When finished, press START/STOP to stop record-
ing and go back to playback.
Tr (Track)
[1...16]
Track to be recorded. After you have entered the
recording mode, you can use this parameter to select a
different track, without exiting the recording mode.
Note: In Song Edit mode the terms track and channel do
not coincide. The MIDI channel of each track can be
freely defined on "Page 3: Track parameters".
126
Quantize Metronome
Ending measure
Recording mode
[OVWR, OVDB, AUTP, MANP]
Mode used for recording.
OVWR (Overwrite) Previously existing data
on the track will be erased and
replaced with new data.
OVDB (Overdub) New data will be added
to previously existing data.
AUTP (Auto punch) You can specify a start
measure and an end measure before
beginning to record, so that only the
specified area will be recorded onto
and other recording parts will not be
"spoilt". When you select this param-
eter, the "Start measure" and "End
measure" parameters will appear.
MANP (Manual punch) You can define the
recording area manually. Follow this
procedure:
1. Select the track you wish to record.
2. Press START/STOP to start playback.
3. Press REC/WRITE/LYRICS at the
beginning of the area you wish to
record. Recording will begin.
4. Press REC/WRITE/LYRICS again at
the end of the area you wish to
record. Recording will stop and play-
back will continue.
Instead of using the REC/WRITE/
LYRICS button, you can switch on
and off the Manual Punch with a spe-
cially programmed pedal or with the
EC5
Assignable pedal/switch" or "Page
15: EC5 external controller" in the
Disk/Global mode.
Tempo mode
[AUT, MAN, REC]
Tempo mode during the song recording.
AUTO The recorded tempo will play during
the next recording stages.
MAN The tempo will be as defined with the
TEMPO/VALUE buttons (or the DIAL).
The tempo changes recorded in the
song will be ignored.
REC The tempo changes will be recorded.
To record the tempo, select the REC
controller. see "Page 14: