Next Backing Sequence; Rename Backing Sequence - Korg iS35 User Manual

Reference • Backing Sequence mode
Page 16: Next Backing Sequence
The "Next Backing Sequence" page allows you to
choose a backing sequence which will be automati-
cally selected when the current backing sequence
ends.

Next backing sequence

Next backing sequence
[OFF, BSEQ0...BSEQ9]
This indicates the backing sequence that will be
selected when the current backing sequence ends. If it
Page 17: Rename Backing Sequence
The "Rename Backing Sequence" page allows you to
change the name of the backing sequence. The name
can be made up of a maximum of 10 characters.
Selected backing sequence
114
Play/Stop
is OFF, at the end the current backing sequence will
carry on playing.
Play/Stop
[STOP, PLAY]
This will set the backing sequence you have selected as
the next one, in Play or Stop. If all the backing
sequences in memory are in Play, they will link up
with the next backing sequence, and backing sequence
9 will link up with backing sequence 0, thus you can
create a "loop" of backing sequences that playback
continuously until you press START/STOP.
STOP The next backing sequence will be
selected, but not played back.
PLAY The next backing sequence will be
selected and played back.
The following characters can be used.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789?!.,:;'`"+-=#&@$
¥%(){}[]<>*/_|^˘¯
Use the CURSOR buttons to move the cursor to the
location of the character you wish to change and the
TEMPO/VALUE buttons (or the DIAL) to choose a
character.
Press INS to insert the character at the cursor location.
Press DEL to delete a character at the cursor location.