Table of Contents
Advertisement
Page 11: Effect select
The instrument has two incorporated digital effect
processors for the sounds produced by the internal
sound generation. In this page, you can choose which
Page 12: Effect modulation
In this page you can connect the effects to one or two
controls, which allow you to dynamically modulate
their intensity. For more details, see page 192.
Page 13: Effect placement
In this page you can choose the effect setup of the
backing sequence, and program pan and levels for
channels C and D. Pan and sending of arrangement
tracks are programmed in the Arrangement Play mode
Page 14: Effect 1 settings
Page 15: Effect 2 settings
These pages contain the effect parameters selected on
"Page 11: Effect select", that will be used for the
selected backing sequence. The settings of the other
operative modes are carried out in the respective
modes.
Reference • Backing Sequence mode
effects you wish to assign to each processor. For more
details, see page 191.
on "Page 3: Track settings (1)". Pan and sending of
extra tracks are programmed on "Page 10: Extra Track
settings (2)" in the Backing Sequence mode. For more
details, see page 193.
The parameters contained in these pages will depend
on the effects you have selected. For more information
on programming effects, see page 194.
113
Advertisement
Table of Contents
