Transpose Position - Korg iS35 User Manual

Page 3: Transpose position
In this page you can specify the transpose position in
the MIDI data flow.

TRANSPOSE POSITION

KBD/MIDI&INT
Transpose position
[KBD/MIDI&INT, KBD&SEQ/MIDI&INT, ALL/INT]
This parameter determines whether the TRANSPOSE
buttons will affect the sounds played on the keyboard,
the sounds played back by the song or the messages
sent to the MIDI OUT. The parameter only regards the
Song Play mode. The equivalent parameter contained
on "Page 2: Speaker off/Master tuning/Transpose
position" in the Disk/Global mode does not affect the
Song Play mode. The OCTAVE buttons always apply
only to the keyboard sounds, and are not affected by
this setting.
With the KBD/MIDI&INT option, only the notes
played on the keyboard, sent to the internal expander
and to the MIDI OUT will be transposed. The notes
played from the sequencer or received from the MIDI
IN will not be transposed.
Song Play
sequencer
Transpose
With the KBD&SEQ/MIDI&INT option (normally
selected), the notes played on the keyboard and
played back from the sequencer will be transposed.
Both the notes sent to the internal expander and the
notes sent to the MIDI OUT will be transposed. The
notes received from the MIDI IN will not be trans-
posed.
Song Play
sequencer
With the ALL/INT option, all the notes entering the
internal expander will be transposed. The notes
received from the MIDI IN will be transposed. The
notes sent to the MIDI OUT will not be transposed.
Song Play
sequencer
Reference • Song Play mode
MIDI IN
Scale
generator
MIDI OUT
MIDI IN
Transpose
Scale
generator
MIDI OUT
MIDI IN
Scale Transpose
generator
MIDI OUT
Tone
Tone
Tone
121