Korg iS35 User Manual page 151

ARR (ARRANGEMENT)
This option allows you to load an arrangement from
an arrangement file (.ARR). If the arrangement uses an
USER style, this style will not be loaded with this com-
mand. To load the missing style, use the Load One
Style function.
Source file Arrangement to
be loaded
1. Use the TEMPO/VALUE buttons (or the DIAL) to
choose the program file from which you wish to
load the program.
2. With the CURSOR buttons, move the cursor to the
second field. Use the TEMPO/VALUE buttons (or
the DIAL) to choose the program you wish to load.
3. With the CURSOR buttons, move the cursor to the
third field. Use the TEMPO/VALUE buttons (or the
DIAL) to choose the USER location where you wish
to load the program. Alternatively, you can choose
the location with the buttons in the PROGRAM sec-
tion.
4. Press ENTER/YES to load the program. (Or press
ENTER/NO to stop loading).
PRG (PROGRAM)
This option allows you to load a program from a pro-
gram file (.PRG). If you load a USER Drum program,
the relative USER drum kit will be loaded as well.
Source file Program to be
loaded
1. Use the TEMPO/VALUE buttons (or the DIAL) to
2. With the CURSOR buttons, move the cursor to the
3. With the CURSOR buttons, move the cursor to the
4. Press ENTER/YES to load the program. (Or press
Warning: If the loaded program uses a USER drum kit,
Target location
that drum kit will automatically be loaded. In this case,
any previously existing drum kit in memory will be a
overwritten by the new drum kit.
BSQ (BACKING SEQUENCE)
This option allows you to load a backing sequence
from a backing sequence file (.BSQ).
1. With the TEMPO/VALUE buttons (or the DIAL)
2. With the CURSOR buttons, move the cursor to the
3. With the CURSOR buttons, move the cursor to the
4. Press ENTER/YES to load the backing sequence.
Target location
Reference • Disk/Global mode
choose the program file from which you wish to
load the program.
second field. Use the TEMPO/VALUE buttons (or
the DIAL) to choose the program you wish to load.
third field. Use the TEMPO/VALUE buttons (or the
DIAL) to choose the F(USER) or the Dr 27-28 loca-
tion, where you wish to load the program.
EXIT/NO to stop loading).
Source file BS to be loaded
choose the backing sequence file from which you
wish to load the backing sequence.
second field. Use the TEMPO/VALUE buttons (or
the DIAL) to choose the backing sequence you wish
to load.
third field. Use the TEMPO/VALUE buttons (or the
DIAL) to choose the location where you wish to
load the backing sequence.
(Or press EXIT/NO to cancel the operation).
Target location
143