Selecting; Loading; Listening - Korg iS35 User Manual

Getting Started • Tutorial
The REC/WRITE/LYRICS led will light up.
To stop the song, press START/STOP.
5
Listening to all the song on a disk
1 Insert the disk containing the songs in SMF for-
mat 0 or 1.
Press SONG PLAY to enter the Song Play mode.
2
The SONG PLAY and REC/WRITE/LYRICS leds
will light up.
3 If the name of a song appears on the display,
press EXIT/NO to display "ALL SONG PLAY"
and a series of hyphens (---).
Now all the songs contained in the disk are
selected. Press EXIT/NO to go back to ALL SONG
after selecting a single song.
4 Press START/STOP to start the playback of all
songs.
The songs in SMF format 0 are played back at once.
If the song is in M-live (MidiSoft), Solton, or
Tune1000 or compatible (Edirol, GMX, KAR, HitBit,
XF) format and contains lyrics, the lyrics appear on
the display in time with the music. If not, the dis-
play shows the standard information.
If the song is in M-live (MidiSoft), Solton, GMX or
XF format and contains chord abbreviations, the
abbreviations appear on the display in time with
the music.
The songs in SMF format 1 must be loaded in mem-
ory first, then after a few seconds wait they are
played back. If some backing sequences or songs
are already loaded in the Song Edit mode, a mes-
sage will appear asking you if it is OK to erase this
data. If you don't mind losing the data in memory,
press ENTER/YES to start playback.
If you wish to retain the data, press EXIT/NO to
cancel loading. Switch to the Disk/Global mode
and save the song and backing sequences in
another disk. Then go back to the Song Play mode
and repeat the operation.
30
If the played song is in Tune1000 or compatible
(Edirol, GMX, KAR, HitBit, XF) format, press
REC/WRITE/LYRICS to switch to the Lyrics 2
mode.
Press REC/WRITE/LYRICS to change the viewing
mode from the lyrics (Lyrics modes) to the stand-
ard executive information (Play mode).
Press REC/WRITE/LYRICS again to view the lyr-
ics (Lyrics 1 mode).
Press START/STOP to stop the playback.
5
JukeBox
The JukeBox allows you to create a list of songs to
be played back with just one command, choosing
among the songs contained on the disk.
Insert the disk containing the songs in SMF for-
1
mat 0 or 1 into the disk drive.
2 Press SONG PLAY to enter the Song Play mode.
The SONG PLAY led will light up.
Choose the first song with the TEMPO/VALUE
3
buttons (or the DIAL).
4 Press ENTER/YES to insert the song in the list.
The name of the song, alongside its position
number on the list, will appear on the display.
Number 1 will appear after you have inserted the
first song.
Position on the list
Selected song