•
Control Panel
Select main source / PIP source, enable/disable PIP/PBP, change the
layout / PIP size, swap, and change the test pattern.
•
Projector Information Panel
Check the projector information for power status, Pic mute status, OSD
status, IP address and Mac address.
•
Switch Panel
Switch the on/off status of power, Pic mute, and OSD.
4.9.3
Display the current status of light source, cooling (fans), version numbers and
signal (source) information
4.9.4
Control the focus, lens shift and zoom adjustments for the lens.
H Series User Manual
020-000772-02 Rev.1 (08-2015)
Main Tabbed Page - Status
Main Tabbed Page - Lens
Section 4: OPERATION
4-22