Ethernet Configuration - HP StorageWorks N1200 User Manual

Serial/Telnet User Interface

Ethernet Configuration

In the Configuration Menu, choose 2) Ethernet Configuration to set up the
Ethernet network. When this option is selected, the Ethernet Configuration Menu
is displayed.
Current Ethernet settings are displayed with available Ethernet configuration
options (see
Figure 47: Ethernet Configuration Menu
Note:
completing configuration changes, select X) Return to previous menu and then select
A) Save Configuration to record the changes.
Ethernet Configuration Menu options:
96
Figure 47).
To view or change configuration settings, select the desired menu option. After
1) Change IP address (default: 1.1.1.1) changes the router IP address.
2) Change IP Subnet Mask (default: 255.255.255.0) changes the router
Subnet mask.
Network Storage Router N1200 User Guide