Scsi Bus Configuration - HP StorageWorks N1200 User Manual

SCSI Bus Configuration

When a SCSI bus is selected in the Ports Menu, the SCSI Bus Configuration
screen is displayed (see
Figure 24: SCSI Bus Configuration screen
SCSI bus configuration settings:
Note:
Network Storage Router N1200 User Guide
Figure
Primary Initiator ID (default: 7) must be a unique ID.
Alternate Initiator ID (service mode-restricted access) (default: none) will
be used if the primary ID is taken. Must be a unique ID.
Target ID(s) adds or removes Target IDs.
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change and
verify the desired setting. HP recommends backing up the router configuration
to an external file before making changes to this setting.
Target IDs must be setup prior to mapping devices on the SCSI bus.
24).
Visual Manager User Interface
59