Editing The Current Map; Editing The Current Map - HP StorageWorks N1200 User Manual

Serial/Telnet User Interface

Editing the Current Map

In the Device Mapping Configuration Menu, choose 5) Edit Current Map to edit
the current map.
The Map Edit Menu subscreen is displayed (see
Note:
Figure 54: Map Edit Menu
Map Edit Menu options:
Each editing option is discussed in the following sections.
Changing the Name of the Current Map
To change the name of the current map, in the Map Edit Menu, select 1) Edit
Name. Enter the new name at the prompt.
Note:
110
Auto-Assigned and SCC Maps cannot be edited.
1) Edit Name (changes the name of the current map.
2) Edit Map Entries (changes the content of the current map.
3) Clear Map (erases all entries from the current map.
4) Fill Map (automatically completes the entries for the current map.
Only user-defined map names can be changed.
Figure 54).
Network Storage Router N1200 User Guide