HP StorageWorks N1200 User Manual page 71

Viewing and Changing SCSI Map Information
To view or change current SCSI map host information:
1. In the Mapping Menu screen, select the desired SCSI bus.
2. Select Edit/View in the Map section of the screen.
3. Enter the new settings and then click the appropriate action button
Figure 31: SCSI Map dialog box
Note:
ID must be enabled from the SCSI Bus Configuration Menu. A Target ID should only be
added if there is a SCSI initiator that needs to address Fibre Channel devices. Each
Target ID can be used to store up to 32 Fibre Channel devices.
Note:
entries deleted.
Note:
Network Storage Router N1200 User Guide
The SCSI Map dialog box is displayed. Current map information is shown at
the top of the dialog box.
(see Figure 31).
To map Fibre Channel devices to any SCSI initiator on the selected bus, a Target
Auto-Assigned and SCC maps cannot be modified, cleared, filled, or have
Map settings are saved to memory when any button within the page is selected.
Visual Manager User Interface
71