Mapping Menu - HP StorageWorks N1200 User Manual

Visual Manager User Interface

Mapping Menu

Each physical port/bus on the router can have the following maps:
Table 5: Device Map Types
Auto Assigned
Indexed (default)
SCC
Custom
Each map has a unique name and map ID; one of the maps must be identified as
the "current" map for the router to use.
Accessed from the Main Menu, the Mapping Menu is used to view and modify
host and map information for a Fibre Channel port or SCSI bus. Maps and hosts
can be added, edited, or deleted.
To view or change map settings of a specific port or bus:
1. Select the port or bus from the menu bar on the left side of the screen or from
2. Specific mapping information is displayed, including the name of the port, the
3. To make changes to the configuration, enter the new value and then select
Because some mapping configuration settings are the same for Fibre Channel and
SCSI maps and some settings are unique, this mapping section is subdivided as
follows:
64
Map Type System/User Generated
System
System
System
User
the router image at the top of the screen.
selected host, and the assigned map.
Submit.
Common Fibre Channel and SCSI Mapping
Fibre Channel Mapping
SCSI Mapping Tasks, page 70
Tasks, page 65
Tasks, page 66
Network Storage Router N1200 User Guide
Fibre Channel or SCSI
Fibre Channel and SCSI
Fibre Channel and SCSI
SCSI
Fibre Channel and SCSI