HP StorageWorks N1200 User Manual page 117

Note:
WWN, and LUN ID must be entered.
Note:
message will be displayed.
Removing Gaps in the Map
To remove any incremental gaps in the sequence of LUN listed in the table, in the
Edit Map Entries screen, select Remove (R).
As the system removes any gaps from the table, the LUN are renumbered in
sequential order, starting with LUN 0.
Note:
to detect all devices.
Deleting a Map Entry
To delete an entry from a map, in the Edit Map Entries screen, select Delete (D).
For Fibre Channel maps, at the prompt, either enter the LUN ID of the LUN to
delete or enter D to delete multiple LUN.
For SCSI maps, at the prompt, enter the Target ID and LUN ID of the LUN to
delete or enter D to delete multiple LUN.
Clearing the Entries from the Current Map
To remove all entries from the Current map, in the Edit Map Entries screen, select
3) Clear Map. A confirmation prompt is displayed.
Network Storage Router N1200 User Guide
If the device being added is a Fibre Channel device, the Node WWN, Port
If this device is a duplicate of a device currently present in the device list, an error
Some operating systems require gaps be removed in the mapping table in order
Serial/Telnet User Interface
117