SCSI to Fibre Channel Protocol Process
In this example, a SCSI host (initiator) on the SCSI bus issues commands and the
information is passed through the router to a target on the Fibre Channel Storage
Area Network (FC-SAN).
each step.
Figure 5: Converting SCSI to Fibre Channel protocol process
FC Device
Table 4: Converting SCSI to Fibre Channel protocol process description
Item
1
2
3
4
5
Network Storage Router N1200 User Guide
FC Device
5
Hub or Switch
SCSI Host
1
Fibre Channel
SCSI
A SCSI host issues a command to the router.
The SCSI controller in the router interprets the command and places it in
buffer memory.
The router processor interprets data and programs the router Fibre
Channel controller to process the transaction.
The router Fibre Channel controller translates data into an FCP protocol
packet and sends it to the Fibre Channel target.
The Fibre Channel target interprets the FCP protocol packet and executes
the command.
Figure 5
is an illustration of the process and defines
StorageWorks Router
4
FC Controller
2
SCSI Controller
Description
Introduction
3
23