HP StorageWorks N1200 User Manual page 102

Serial/Telnet User Interface
102
A) Edit FC Override Settings (service mode-restricted access) enters Fibre
Channel override settings.
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change and
verify the desired setting. HP recommends backing up the router configuration
to an external file before making changes to this setting.
A sub-screen is displayed, listing the following options:
— 1) Toggle Hi-Sup Bit Settings changes the Hi-Sup Bit settings.
Options include Set and Clear.
— 2) Toggle Forcing FCP Response Code for HP HBA #223180-B21 and
#120186-001, changes the forcing of the FCP response code.
Options include Off and On.
— 3) Toggle Initiator Bit Setting in PRLI_ACC changes the Initiator bit
setting. Options include Set and Clear.
If the router is deployed in a router-to-router configuration where at least
one router appears as target and another as initiator, set this option to Set.
— 4) Toggle Fibre Channel Link Garbage Deletion changes the Fibre
Channel Link garbage deletion.
Options include Enabled and Disabled.
Network Storage Router N1200 User Guide