Serial/Telnet User Interface - HP StorageWorks N1200 User Manual

Serial/Telnet User Interface

The Serial/Telnet User Interface (UI) is used to configure and manage the HP
StorageWorks Network Storage Router. This chapter describes the configuration
menus and option tasks available in the Serial/Telnet UI.
Note:
reboots.
During the start up process of the router, the Serial/Telnet UI displays initial
power-up messages. After the power-up process is completed, the Main Menu of
the UI is displayed. Within the router Main Menu, several configuration menus
and tasks are listed. All configuration and management tasks are performed from
these menus.
This chapter is organized using the same structure as the router Main Menu and its
associated submenus. The sections are:
Network Storage Router N1200 User Guide
Unless otherwise indicated, configuration changes take effect when the router
Telnet UI Access, page 89
Serial UI Access, page 90
Power up Messages, page 91
Serial/Telnet UI Main
Configuration Menu, page 93
Baud Rate Configuration, page 95
Ethernet Configuration, page 96
Fibre Channel Configuration, page 99
Parallel SCSI Configuration, page 103
Device Mapping, page 106
- Selecting the current map
Menu, page 92
4
87