HP StorageWorks N1200 User Manual page 113

Adding a Map Entry to a Fibre Channel Map
To add a new entry to a Fibre Channel map:
1. In the Map Edit Entries screen, select Add (A) (see
Figure 57: Adding an Entry to a Fibre Channel map
2. Enter the desired LUN ID.
Note:
3. To select the map entry to edit, enter the number from the left-hand column of
Figure 58: Device List generated for a Fibre Channel port
4. In the Device List, to add a listed device to the map, enter the number from the
Network Storage Router N1200 User Guide
If the selected LUN is already present in the map, a prompt is displayed that
asks to either confirm the override or enter different address information.
A device selection list is automatically generated.
Devices cannot be mapped to their native port.
the Port Map Edit Display screen (see
"Num" column.
If the selected device is already mapped, an error message will appear,
warning about adding a duplicate device.
Serial/Telnet User Interface
Figure
Figure 58).
57).
113