Serial/Telnet User Interface
Active Fabric Configuration
In the Configuration Menu, select 8) Active Fabric Configuration to enter Active
Fabric options (see
Figure 75: Active Fabric Configuration Menu
Active Fabric Configuration Menu options:
Note:
desired, at least one controller LUN must be enabled and included in a relevant map.
Note:
is also enabled.
128
Figure
1) Toggle Server-Free Backup Mode changes the Server-free Backup
setting. Options include On and Off.
When set to On, server-free backup capability is enabled to accept Extended
Copy commands.
2) Change the number of controller LUN (default: 1) changes the number
of controller LUN.
This setting is a number in the range of 0 through 4.
For Server-Free Backup Mode functionality, if addressing a Controller LUN is
When Server-Free Backup Mode is set to ON, be sure Fibre Channel Discovery
For more information on controller LUN and Extended Copy commands, see
Appendix B, "Controller LUN Commands."
For information about server-free backup, see "Introduction" on page 17.
75).
Network Storage Router N1200 User Guide