HP StorageWorks N1200 User Manual page 114

Serial/Telnet User Interface
Adding a Map Entry to a SCSI Map
To add a new entry to a SCSI map:
1. In the Edit Map Entries screen, select Add (A) (see
Figure 59: Adding an Entry to a SCSI map
2. Enter a Target/LUN ID combination.
Note:
Figure 60: Device List generated for a SCSI port
114
If the selected Target/LUN is already present in the map, a prompt is
displayed that asks to either confirm the override or enter different address
information.
A device selection list is automatically generated (see
Devices cannot be mapped to their native port.
Figure 59).
Figure
Network Storage Router N1200 User Guide
60).