Creating A New Map; Creating A New Map; Removing The Current Map; Removing The Current Map - HP StorageWorks N1200 User Manual

Figure 53: SCSI Current Map display
Note:
between screens.

Creating a New Map

In the Device Mapping Configuration Menu, choose 3) Create New Map to
create a new map for the port or bus.
The Create New Current Map subscreen is displayed.
At the prompt, enter a name for the new map. When a new map is created, it
automatically becomes the Current Map.

Removing the Current Map

In the Device Mapping Configuration Menu, choose 4) Remove Current Map to
remove the Current map and restore the default map as Current.
A verification prompt is displayed.
Network Storage Router N1200 User Guide
The entire list may not fit on one screen. Press N or P to go back and forth
Serial/Telnet User Interface
109