Using Emulation Mode - Extron electronics DXP DVI User Manual

Help menu
From this menu you can open the Matrix Switcher Control Program help file.
IP Connection
•
Contents
procedures for using the software to control and configure the DXP.
•
Switcher information
menu options; they display information about your switcher:
Model — DXP model name
•
Config — Video and audio matrix size: V(nxn) A(nxn)
•
Firmware Ver. — Firmware version to second decimal place
•
LoggedOn as: — Administrator or User
•
Connection – (For RS-232 or RS-422) "Com n" –
•
"IP – [IP address]"
•
About this Program
version of the Matrix Switcher Control Program.

Using Emulation Mode

Emulation mode lets you set up the software without connecting the DXP to the computer.
NOTE: In emulation mode, you can emulate any matrix switcher that is supported by
1. Double-click the
Electronics group or folder.
2.
On the Comm Port Selection window, select
— Displays the Matrix Switcher + Help program, in which you can find
— The two sections below the
— Opens a window that displays information about the current
the Matrix Switcher Control Program; you are not limited to the DXP.
MATRIX Switchers + Control Program
DXP DVI, DXP DVI Pro, and DXP HDMI Series • Matrix Software
Serial Connection
Contents
baud rate
icon in the Extron
, then click
Emulate OK
option are not
," or (for IP)
.
99 99