Table of Contents
Advertisement
Master-Reset selection
Master reset performs all of the following functions:
Clears all ties
z
z
Clears all presets
z
z
Clears all video and audio mutes
z
z
Sets all input audio levels to unity gain (0 dB)
z
z
Sets all output volume levels to 100% (0 dB of attenuation)
z
z
NOTE:
Master reset does not reset the Internet protocol (IP) settings.
Using Emulation Mode
Emulation mode allows you to set up the software without connecting the switcher. Use
emulation mode as follows:
1.
Click
Start
>
Programs
MATRIX Switcher + Control Pgm
2.
Choose
, and click
Emulate
3.
Choose an emulation file to open, and click
of a completed matrix setup. Selecting the file NEW.INI or clicking
blank setup window to get you started.
4.
Enter the file name under which you want to save any changes to the file, and click
5.
Select
as the Matrix Model,
MPX 866
Audio Planes (see figure 51). Click
Figure 51.
Emulate Configuration Dialog Box
6.
Continue using the program as described on
MPX 866 A Media Presentation Matrix Switcher • HTML Operation
>
Extron Electronics
>
.
.
OK
. The file DEMO.MTX provides a sample
OK
as the Video Planes; and
14 x 12
OK
.
page
79.
Matrix Switchers
>
provides a
Cancel
as the
14 x 6
.
OK
93
Advertisement
Table of Contents
