Table of Contents
Advertisement
im Vertrieb von
Master-Reset selection
Using emulation mode
www.camboard.de
CAMBOARD Electronics
Icons in I/O boxes — Erases any numbers in the I/O boxes in the Control
Program window (fi gure 5-4). You can place icons in the boxes.
Numbers in I/O boxes — Erases any icons in the I/O boxes in the
Control Program window and fi lls each box with the associated
input or output number.
Catch FPC/others changes — When checked, sets the switcher to report all
confi guration and setting changes to the Remote RS-232 or Ethernet
connection that turned this selection on. These reports allow the Matrix
Switcher Control Program to track the changes that occur in the switcher's
confi guration and settings, whether commanded via the front panel, the
RS-232 ports, or the Ethernet port.
Master reset clears all ties and presets, all video and audio mutes, sets
all input audio levels to unity gain (+0 dB), and sets all output volume
levels to 100% (0 dB of attenuation).
N Master reset does not reset the Internet protocol (IP) settings.
Emulation mode allows you to set up the software without attaching the switcher
to the computer. To use emulation mode, do the following:
1.
Double-click the Matrix Switcher Control Program icon in the Extron
Electronics group or folder.
2.
Choose Emulate, and click Ok.
Choose an emulation fi le to open, and click on Ok. The fi le DEMO.MTX
3.
provides a sample of a completed matrix setup. Selecting the fi le NEW.INI or
clicking Cancel provides a blank setup to get you started.
4.
Enter the fi le name under which you want to save any changes to the fi le, and
click Ok.
Tel. 07131 911201
MPX 866 A Media Presentation Matrix Switcher • Matrix Software
Fax 07131 911203
ce-info@camboard.de
5-17
Advertisement
Table of Contents
