Using.emulation.mode; Using The Help System - Extron electronics CrossPoint 450 Plus Series User Manual

Matrix Software, cont'd
Using Emulation mode
Emulation mode allows you to set up the software without connecting the switcher
to the computer. To use Emulation mode, do the following:
1.
2.
3.
4.
5.
Figure 5-18 — Emulation mode configuration
6.

Using the help system

For information about program features, you can access the help program in any of
the following ways:
•
•
•
5-24 CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
Start the Matrix Switcher Control Program.
Choose Emulate, and click OK.
Choose an emulation file to open, and click OK. The file DEMO.MTX provides
a sample of a completed matrix setup. Selecting the file NEW.INI or clicking
Cancel provides a blank setup to get you started.
Enter the file name under which you want to save any changes to the file, and
click OK.
Select 6464 Series, the matrix size, and the number of video planes (video
format) and audio planes (None or 1 or 2), for which you are preparing a
configuration (figure 5-18), and click OK.
Continue using the program as described on page 5-6.
From the Extron Electronics program folder or group, double-
click the MATRIX Switcher Help icon (shown at right).
From within the Matrix Switchers Control Program, select from
the Help menu on the main screen.
From within the Matrix Switchers Control Program, press the F1 key.