Sync Time To Pc Button - Extron electronics DXP DVI User Manual

Setting the local time
The (local) field displays the current time in the local time zone. If necessary, click
Time
the button to set the switcher to the internal time on your computer, or
Sync Time to PC
adjust the time manually as follows:
1. Click in the (local) field. A time editing field appears with the date in the format
Time
: : ( : : to
HH MM SS 00 00 00 23
time editing field.
2.
Edit the field as desired to set the proper time. Remember to use 24-hour time.
Leading zeros are optional.
3. Press the <Tab> key or click in another field to exit the
4. Click the button for the time change to take effect.
Take

Sync Time to PC button

Clicking the
Sync Time to PC
internal time to the switcher in a set time command.
Setting the offset from GMT
The field displays the amount of hours and minutes that the local time varies from the
GMT
GMT international time reference. If necessary, adjust the offset as follows:
1. Click in the field. An offset editing field appears with the offset in the format
GMT
± : ( to
HH MM –12:00 +14:00
offset field.
2. Edit the field as desired to set the proper offset. Leading zeros are optional. Some
time zones are on the half-hour (30 minutes).
3. Press the <Tab> key or click in another field to exit the set offset field.
4. Click the button for the offset change to take effect.
Take
Enabling daylight savings time
When daylight savings time is enabled, the switcher updates its internal clock between
daylight savings time and standard time in the spring and fall on the date that the time
change occurs in your location. When daylight savings time is turned off, the switcher
does not adjust its time reference.
Select the
Use Daylight Savings
Setting the administrator password
The
Administrator Password
DXP switcher via the Ethernet port with all administrator rights and privileges. Passwords
are case-sensitive and are limited to 12 uppercase and lowercase alphanumeric
characters.
While you are logged on as a user, this field is masked with asterisks (
security measure.
NOTES: • The following characters are invalid or not recommended in passwords:
+ ~ , @ = ` [ ] { } < > ' ' " " ; : | \ ?
• Editing the
Administrator Password
can immediately disconnect your computer from the DXP. It is recommended
that you connect via RS-232 or RS-422 to edit this field.
DXP DVI, DXP DVI Pro, and DXP HDMI Series • Matrix Software
: : ). The graphic cursor becomes a text cursor in the
59 59
button causes the computer you are operating to send its
). The graphic cursor becomes a text cursor in the set
check box to enable daylight savings time.
field displays the password required to log on to the
field while connected via Ethernet
field.
Time
) as a
************
and .
{space}
82