Extron electronics DXP DVI User Manual page 103

•
Ties as Crosspoints
that have been made are indicated by amber boxes.
To create a tie, click in a crosspoint box. A
•
clicked, indicating a tie has been formed.
To break a tie, click on the desired amber (tied) box. A
•
the amber fill is cleared from the box.
Figure 97. Ties Shown as Crosspoints
•
Signal-detection options
signal detection (DSVP) feature to do one of the following:
Automatically refresh the display every 10 seconds.
•
Sample the sync and update the display whenever you make a configuration
•
change (
On Demand or by Refresh
Never sample and display the sync or no sync status (
•
•
Limit ties to same group
outputs that are in the same group (similar to front panel operation).
• — Displays icons that you place in the I/O boxes in the matrix
Icons in I/O boxes
figure 96
window (see
DXP DVI, DXP DVI Pro, and DXP HDMI Series • Matrix Software
— Displays ties as a matrix of inputs and outputs. Current ties
sign appears briefly in the box you
+
— Provides a submenu that allows you to set the input
).
— Allows you to create ties only between inputs and
on the previous page).
sign appears briefly and
–
).
None
97