Table of Contents
Advertisement
]
Password:
The switcher initiates the password message immediately after the copyright message
when the controlling system is connected using TCP/IP or Telnet and the switcher is
password protected. This message means that the switcher requires an administrator or
user level password before it will respond to the commands entered via this link.
NOTE: The Password prompt is redisplayed if an incorrect password is entered.
]
]
Login Administrator
]
]
Login User
The switcher initiates the login message when a correct administrator or user password
has been entered. If the user and administrator passwords are the same, the switcher
defaults to administrator privileges.
]
Qik
The switcher initiates the
Qik
occurred.
]
Rprnn
The switcher initiates the Rpr message when a memory preset has been recalled from the
front panel. "
" is the preset number.
nn
]
Sprnn
The switcher initiates the Spr message when a memory preset has been saved from the
front panel. "
" is the preset number.
nn
]
Vmtn
The switcher initiates the Vmt message when a video output mute is toggled on or off
from the front panel. "
" is the mute status:
n
]
Amtn
The switcher initiates the Vmt message when a video output mute is toggled on or off
from the front panel. "
" is the mute status:
n
]
Exen
The switcher initiates the Exe message when executive mode is toggled on or off from the
front panel. "
" is the executive mode status:
n
functions locked,
= only advanced functions locked.
2
DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control
message when a front panel switching operation has
= on,
= off.
1
0
= on,
= off.
1
0
= front panel unlocked,
0
= all front panel
1
52
Advertisement
Table of Contents
