Important Safety Information And Instructions - AMX DXLink Multi-Format SMF-D Instruction Manual

Important Safety Information and Instructions

When using and installing your AMX product, adhere to the following basic safety precautions. For more information
about operating, installing, or servicing your AMX product, see your product documentation.












Instruction Manual – DXLink Fiber™ Transmitters and Receivers, Duplex
Read and understand all instructions before using and installing AMX products.
Use the correct voltage range for your AMX product.
There are no user serviceable parts inside an AMX product; service should only be done by qualified
personnel.
If you see smoke or smell a strange odor coming from your AMX product, turn it off immediately and call
technical support.
For products with multiple power supplies in each unit, make sure all power supplies are turned on
simultaneously.
Use surge protectors and/or AC line conditioners when powering AMX products.
Only use a fuse(s) with the correct fuse rating in your enclosure.
Make sure the power outlet is close to the product and easily accessible.
Make sure the product is on or attached to a stable surface.
Turn off equipment before linking pieces together, unless otherwise specified in that product's
documentation.
For safety and signal integrity, use a grounded external power source and a grounded power connector.
To avoid shock or potential ESD (Electrostatic Discharge) damage to equipment, make sure you are properly
grounded before touching components inside an AMX product.
Important Safety Information and Instructions
7