Specifications - Optus S2 User Manual

EXPERIENCING PROBLEMS
8
Fault Description
48 HPA Temperature alarm
49 Dome antenna alarm (1)
50 Dome antenna alarm (2)
51 Invalid Freq sent to Dome antenna
52 Invalid command sent to Dome antenna
53 Error response from Dome antenna
180

SPECIFICATIONS

9
Power
Input Supply
Maximum Ripple
The following current consumption figures are for use with a
12Volt supply and Class 1 operation.
Off
Standby
In Call (Rx voice)
In Call (Tx voice)
In Call (Rx fax)
In Call (Tx fax)
Frequency Range
Transmit
Receive
Channel
Voice Channel
Facsimile channel
Data Channel
Bandwidth
Dimensions
Transceiver
Transceiver with cradle
Handset
RF Output Power
nominally +4dBW±1dB Class 1 (antenna connector).
nominally +1dBW±1dB Class 2 (antenna connector).
nominally +7dBW±1dB Class 3 (antenna connector).
10.5-32.0 Volts (regulated)
150mV
<10 milliamps (12V)
0.5 Amps (12V)
0.7 Amps (12V)
2.3 Amps (12V)
3.2 Amps (12V)
3.2 Amps (12V)
1646.5-1660.5 MHz
1545.0-1559.0 MHz
AMBE ®
Group 3, 2400 bps
2400 bps
< 4 kHz
Length 267mm
Width 240mm
Height 48mm
Length 301mm
Width 241mm
Height 61mm
Length 210mm
Width 54mm
Height 37mm
181