Displays And Tones - Optus S2 User Manual

3 DURING A CALL
• Release the to return to normal operation.
M
Scratchpad Memory
You may be given information that you wish to store such as a
new phone number or person's name (name tag). This can be
entered on to the scratchpad (as seen on the screen) for saving
to a memory location during or after the call is complete. See
page 46.
28
3

DISPLAYS AND TONES

Display Function
abc) Phone is in Name-Tag mode. (lower case)
ABC) Phone is in Name-Tag mode. (upper case)
Another call Attempt to use the phone while it is busy with
is in progress another call.
Call Incoming call ring tone. "Call" display flashes
while phone is ringing.
Call Alert Call setup in progress. Wait for "Call" to be
displayed before answering.
Call is in FCN 82 attempt to send a message while a
progress - call is in progress.
Cannot SND
Called Called-in-absence indicator "Called" remains
on display until cleared (erased).
Calling Displayed during an outgoing call setup.
Clearing Call is clearing
Data port in Data call is in progress
Use
Fault (X) Your phone tests itself for irregularities.
These usually do not prevent the phone from
working, but should be reported to your dealer
as a non-urgent matter.
FCN FCN key is pressed. Refer to page 86.
FL Phone is in Full Lock mode.
HA FCN 32, Optional Horn Alert mode activated
(horn, lights etc.).
HD FCN (Hold) displays the Hidden Digits in a
long phone number.
I/C Data/Fax A fax or data call has been started
Started
IC Call Failed An incoming call attempt failed.
29