Fcn 21: Own Number - Optus S2 User Manual

6

FCN 21: OWN NUMBER

FCN 2 1
Own Number
+ -
or Toggle between voice/fax/
data number
STO
To edit selection
X X X
... New Number
STO
SAVE and EXIT
CLR
(Hold) EXIT without saving
This function allows you to hold your own phone number for easy
reference. The number stored here is not used by the network
operations. If the incorrect number is loaded the phone will still
work using the network allocated number, i.e. this number is
only kept here for your information.
The Optus MobileSat S2 may have different numbers for voice,
fax and data calls. From the Own Number screen, it is possible
to record your allocated fax number and data number.
To View Your Own Telephone Number:
FCN 2 1
to display your own phone number. To view the
rest of any long number, press
FCN
(hold) for over one second.
+
/ - Scroll to own fax number
or own data number.
Editing these numbers is the same as
editing your own phone number.
STO SND
or and then press
FCN 21
Own Number
0145107145
96
6 FCN 21: OWN NUMBER
EXIT without saving
CLR
(Hold) Return to previous screen.
To Modify your Own Numbers
FCN 2 1
to display your own phone number
+ -
(Use / to select the number to modify).
SND STO
, or digit key to begin editing.
Enter number from keypad.
CLR
(momentarily) to correct errors.
It is not possible to switch between own phone number, data
number or fax number while in edit mode.
SAVE and EXIT
STO
A message saying "Stored" will be displayed for about 5
seconds, before returning to Standby screen. (This can be
cleared immediately by pressing the
EXIT without saving
CLR
(Hold) Return to previous screen.
Note: The number cannot be changed whilst the phone is in Partial or Full
Lock.
CLR
key.)
97