Fcn 62: Lock Mode - Optus S2 User Manual

FCN 62: LOCK MODE

6
FCN 6 X X X X
+
or -
STO
CLR
To prevent unauthorised use of the phone, it is possible to lock
the phone, limiting outgoing calls to a restricted range, or
banning all outgoing calls from the handset (except
EMERGENCY calls which are always permitted). This function
turns on (or off) the lock into one of two levels, (Partial or Full
Lock) using the 4 digit Confidential Code. Refer to "Phone Locks
and Codes", page 50.
Note: The default Confidential Code is 0000. If you forget your Confidential
Code you must consult your dealer to reset it.
DISPLAY Current Lock Status
FCN 6 X X X X
2
The Confidential Code digits are not displayed as they are
entered but the keypad tone will sound.
The display will now show the current lock status.
Possible selections are "Normal", "Partial" or "Full Lock".
FCN 62
Lock Mode
Normal
2 Lock Mode
Change Status
SAVE and EXIT
EXIT without saving
using Confidential Code.
126
FCN 62: LOCK MODE
6
CHANGE the LOCK
+ or will step through the 3 options of "Normal",
-
"Partial" and "Full Lock".
The display will start flashing indicating that this status has
been changed but has not been saved.
SAVE and EXIT
STO
Save the lock status and EXIT.
EXIT without saving
CLR
Return to previous screen.
EXAMPLES of Display after lock set.
PL
12
Standby
(Partial Lock)
Refer also to FCN 63 – Automatic Lock.
FL
12
Standby
(Full Lock)
127