Fcn 37: Handsfree Sensitivity; Fcn 41: Ring Volume - Optus S2 User Manual

FCN 37: HANDSFREE SENSITIVITY

6
FCN 3 7
Handsfree Sensitivity
+
or - Change Status
STO
SAVE and EXIT
CLR
EXIT without saving
For different handsfree environments, the Optus MobileSat S2
provides a function to alter the handsfree sensitivity of the
microphone.
Display Current Mode.
FCN 3 7
to display the current
mode.
Change Mode
+ or - toggles between
"Low", "Mid" and "Max".
The display flashes to show the
setting has been changed but not saved.
SAVE and EXIT
STO
Save the setting and EXIT.
EXIT without saving
CLR
Return to previous screen.
FCN 37
H/free Mic
Mid
112

FCN 41: RING VOLUME

6
FCN 4 1
Ring Volume
+
or - Change Status
STO
SAVE and EXIT
CLR
EXIT without saving
You can set the volume of the following tones.
• Alert Tone (RING for incoming call only)
• Fault Tone
• Message Received – Double Beep
Display Current Volume
FCN 4 1
The phone display shows the current volume and
will start to ring at the present level once it is changed.
Possible settings for the volume are "Max'', "Mid", ''Low",
''Min'', or "Off", while Ring can also be set to "Esc".
"Esc" = Escalating Ring, which means a ring that starts low
and increases in volume to maximum and then repeats. When
Ring is set to "Esc", all other tones are not altered in level
from their previous setting.
When the volume is "Off", the only indication of incoming ring
is flashing backlight and display.
Alter the Volume
+
or - to alter the volume.
The display starts flashing
indicating that this status has been
changed but not saved.
Once a change has been made, the
handset will ring to provide an example of that setting.
SAVE and EXIT
STO
Save the setting and EXIT.
EXIT without saving
CLR
Return to previous screen.
FCN 41
Ring Vol
Mid
113