Last Number Redial; Call Timers And Credits - Optus S2 User Manual

4

LAST NUMBER REDIAL

SND SND
Redial Last Number and sends
RCL 0 0
or Display Last Number
SND
Send Selected Number
+
or or - Select one of Last Five
SND
Send Selected Number
Redial Last Number Dialled
SND SND
While in Standby mode.
Review Last Number Dialled Prior to Sending
RCL
0 0
The last number dialled appears on the display.
The Optus MobileSat S2 saves the
last 5 numbers sent. This list
includes the numbers recalled
from the main memory. If the
same number is sent several
times, these are not recorded as
separate numbers. The memory
shift only occurs when the present
call is different to the previous number.
Scroll Recently Dialled Numbers from Last Memory 0-4
+
/ - When the required phone number appears, you may
SND
press to send it.
Erase these last 5 numbers
Refer to FCN72.
LNO
0392643080
Bill
48
5

CALL TIMERS AND CREDITS

The Optus MobileSat S2 has several functions to monitor the call
time of the transceiver.
• Total Connect Time – Shows the total accumulated incoming
and outgoing call time since last reset. Refer to "FCN 12:
TOTAL CONNECT TIME" on page 91.
• Call Time – Shows the duration of the last call, or displays the
time of the current call. This timer is restarted for each call.
Refer to "FCN 11: CALL TIME" on page 90.
• Outgoing Call Time – Shows the total accumulated call time
for only outgoing calls since last reset. Refer to "FCN 13:
OUTGOING CALL TIME" on page 92.
• Call Time Beeps – these tones allow you to hear beeps during
a call to indicate the duration of the call. Refer to "FCN 14:
CALL TIME BEEPS" on page 93.
• Credit Time Setting – This allows the owner to charge
customers for outgoing calls. Ask your dealer about Call
Credit operation.
The Total Call Timer, (Last/Current) Call Timer and Outgoing
Call Timers may be reset through the clear functions which are
protected by Confidential Codes in the handset.
49