Table of Contents
Advertisement
4
SPEED DIAL
X
X
X
or
Select Memory
OR
RCL
X
X
Wait
SND
Send Number
This section explains how to recall and send the phone numbers
stored by the methods explained in the previous chapters. The
Optus MobileSat S2 has 198 memory locations in two banks:
01-99 and *01-*99.
Note: The access to these numbers may be restricted by the LOCKS as
explained on Page 50.
Speed Dial
X
X
X
or
One or two digits. The memory location will not
be displayed on the screen.
SND
to dial and send the pre-stored number from the
memory location XX. Memories *01-*99 can also use this
facility.
The desired phone number may be recalled to the display, prior
to dialling or for confirmation. It is possible to step through the
memory in numeric or alphabetical order by toggling the
+
/
-
keys. (See next page.)
42
4
SPEED DIAL
Display Number Before Dialling
RCL
X
X
Recall memory address.
SND
to dial and send the number if it is correct.
CLR
to cancel.
Having recalled a number, you may scroll up or down through
the memory. The order in which numbers are scrolled
(numerical or alpha), is affected by how you first recalled the
number to the display.
Scroll Display in Numerical Address Order
RCL
X
X
to display first position for numerical scroll.
+
-
/
to scroll display up or down numerical address
order.
SND
to dial and send the displayed number.
Scroll Displays in Alphabetical (Name Tag) Order
RCL
with no trailing digits.
+
-
/
scroll display up or down alphabetical order.
SND
to dial and send to the displayed number.
43
Advertisement
Table of Contents
