Scratchpad Memory - Optus S2 User Manual

4

SCRATCHPAD MEMORY

During a call, you can use the display as a scratchpad to enter
information (phone numbers, names, address, etc.) that you may
want to save temporarily. It is possible to save the scratchpad
information in a vacant memory location during a call, or to save
it after the call is ended. Note that even though a 'Clearing'
message appears on the display, once the call has cleared the
scratchpad information will appear on the display, ready to be
stored.
To save this information, you must store it in a Memory Location
or you may immediately dial that number.
Note: The scratchpad information cannot be stored in Partial or Full Lock
mode.
Store a Scratchpad Number
PHONE NO NAME TAG
Enter phone number alone or enter
phone number with Alphanumeric information while call is in
progress.
STO X X
for Memory Manual Storing, or
STO
(Hold) for Memory Automatic Storing.
Dial from Scratchpad Memory
SND
while digits are shown on the display.
WARNING:
IF END TO END DIALLING DTMF TONES ARE
TURNED ON (SEE FUNCTION 46) THEN THE
PARTY AT THE OTHER END WILL HEAR
THE TONES AS YOU TYPE YOUR SCRATCHPAD
DETAILS ONTO THE DISPLAY.
46
4 SCRATCHPAD MEMORY
Edit Scratchpad Memory
CLR
(Momentarily) will backspace the last character.
Note: If the DTMF (FCN 46) digits are being sent, the tone cannot be
CLR
retracted, and the button is not sent as a tone.
47