Handsfree - Optus S2 User Manual

5

HANDSFREE

The handsfree adaptor consists of a handset cradle which has
connectors for a handsfree microphone and external speaker.
Figure 4 – Handsfree Configuration
Handsfree operation is available when the microphone and
external speaker are connected to the cradle and the handset is
placed in the cradle.
Handsfree operation of the phone is the same as that for normal
handset operation, except for the following:
Muting
During Handsfree, the Mute
phone microphone On/Off when you are talking. The phone
automatically exits "Mic Mute" Mode when the phone is "off-
hook" from the cradle.
key (held down) switches the
M
58
5 HANDSFREE
Speaker Volume Control
+ -
Pressing or will adjust the volume of the external
speaker, while the speaker is in use.
The setting of the volume of the handset earpiece is not
changed when adjusting the external speaker volume. The
volume levels of the two operations are saved as separate
settings.
Automatic Answering
During Handsfree, with FCN 33 Auto Answer Mode, the phone
automatically answers a call after 2 rings. The handsfree
microphone should be plugged in for this operation and the
ignition input must be active. Refer to FCN 33 for more
information.
Pick up handset
If you have answered the call without picking up the handset,
it can be picked up later, disabling the handsfree mode, and
reverting to normal handset operation.
Note: Replacing the handset during a call to return to Handsfree mode, does
not "hang up" the call.
Microphone Sensitivity
The sensitivity of the microphone can be adjusted depending
on the environment. Refer to FCN 37.
59